721497-0520

Wastegate MVS-AR (Blue)

This MVS-AR 38mm unit is designed specifically for motorsport applications that can't utilize the water cooling ports on the standard MV-S wastegate.  The MVS-AR or "long neck" has the standard 38mm valve but also has five heat fins that separate the casting from the actuator top.  Born into the world of Motorsport  this wastegate can handle the harshest of conditions and give 100% performance 100% of the time.  It is the choice wastegate of many WRC teams.
Price: 
Price789,00 €
ex-VAT if taxable
Technical Features:
  • The MVS-AR uses stainless steal fins. These take longer to absorb heat so they are beneficial in applications where air does not pass over them in large amounts.
  • Inlet Flange: 1.75" OD, Outlet Flange: 1.50" OD.
  • Spring Pressures .3bar to 1.7bar Included.
  • High temp NiCrFe based alloy is used for valve and 347SS valve housing will offer longer product life compared to competing designs.
  • High temperature silicone Nomex reinforced actuator diaphragm.
  • 17-7 PH Stainless Steel actuator spring gives consistent pressure at high temperature, resist "relaxing" at temperature to 900F (483C).
  • Nitronic 60 Stainless Steel is used for the valve seat, and valve bushing.
  • All Stainless Steel hardware.
  • Mating weld flanges are 304L
  • Color anodized aluminum actuator (Silver, Red, Blue, Purple, Black).
  • 3 lower ports and two top ports for easy install, no need to rotate the actuator top at all, plugs included for unused ports.
  • Air Ports (5): M10 x 1.0, Water Ports (2): M8 x 1.0
  • V-Band inlet and outlet make install easy, flanges and clamps are in the box!
  • Integrated -4 AN water cooling ports that cycle a small amount of coolant through the actuator top to keep the temperatures down in extreme conditions such as road racing. These are leak tested after installation from the factory and can be removed if not utilized.
  • Five heat sinks raise the actuator top away from the casting to dissipate heat when water cooling can not be used
  • Designed for Motorsport/Road Racing
Weight: 1.6 kg
TurboMaster is a company devoted exclusively to the turbocharger's business since its foundation in 1980, i.e. more than 35 years of experience, knowledge and service backing us up, all of them available for your power needs. 
Distributors of the world best brands GARRETT, HOLSET, HITACHI and TIAL.